Skip to content

5 Common Mistakes to Avoid When Applying Concealer with a Brush

5 Common Mistakes to Avoid When Applying Concealer with a Brush

1. Choosing the right concealer shade

When it comes to choosing the right concealer shade, there are a few things to keep in mind. Firstly, match your skin tone. If the concealer is too light or too dark, it can make your skin look uneven and unnatural. Secondly, consider your undertone. Cool toned concealers work well for those with cool undertones (pinkish or blueish), while warm toned concealers are better suited for those with warm undertones (yellowish). Lastly, choose a concealer that is one shade lighter than your natural skin tone. This will give you a natural, even complexion.

2. Applying concealer in a pinch

When you’re in a hurry and don’t have time to properly apply concealer with a brush, there are still a few tricks you can use to get the job done quickly. Here are some tips for applying concealer in a pinch:

1. Use a flat-top brush: A flat-top brush is ideal for applying concealer in a hurry because it allows you to cover a large area quickly. Simply sweep the brush across your face, starting from the center of your nose and working outwards towards your temples and jawline.

2. Dab, don’t blend: When you’re short on time, blending isn’t always possible. Instead, dab the concealer onto your skin using a sponge or your fingers. This will give you a more natural look than if you were to blend it.

3. Use a concealer pen: If you’re really short on time, consider using a concealer pen. These pens are designed to be used on the go and provide quick coverage without the need for blending. Simply dot the concealer onto your blemishes and move on to the next spot.

4. Don’t worry about perfection: When you’re in a hurry, it’s okay if your concealer doesn’t perfectly match your skin tone. The goal is simply to cover up any blemishes or imperfections so that they’re less noticeable.

3. Blending concealer properly

To achieve a flawless complexion, it is important to blend concealer properly. Here are some tips to help you master this skill:

1. Start with a clean face: Before applying concealer, make sure to cleanse and moisturize your skin. This will create a smooth surface for the concealer to adhere to and prevent creasing throughout the day.

2. Use a brush or sponge: Instead of using your fingers to apply concealer, use a brush or sponge to ensure even coverage and avoid any unwanted streaks or lines.

3. Blend, blend, blend: Once you have applied the concealer, take a brush or sponge and blend it into your skin. Start from the center of your face and work your way outwards, blending up towards your hairline and down towards your jawline. Be sure to blend well under your eyes as well, as this is where most people tend to have dark circles.

4. Don’t forget to blend on top: After blending the concealer into your skin, don’t forget to blend it on top as well. This will give you a seamless finish and prevent any creasing throughout the day.

5. Finish with a setting spray: To keep your concealer in place all day, be sure to set it with a setting spray. This will lock in your concealer and keep it from budging until you remove it at the end of the day.

4. Using too much concealer

Concealer is a powerful tool for covering up blemishes and dark circles, but it can also be a double-edged sword if used incorrectly. One of the most common mistakes people make when applying concealer is using too much of it. This can lead to cakey, unnatural-looking skin and make it difficult to blend the concealer evenly. To avoid this mistake, start with a small amount of concealer and always use a brush or sponge to apply it. Blend the concealer in a circular motion, working from the center of the face outward, until the desired coverage is achieved. Remember, less is more when it comes to concealer!

5. Forgotten steps: setting spray and primer

Many people overlook the importance of using a setting spray and primer before applying concealer. These two products can greatly enhance the longevity and texture of your makeup look. A setting spray helps to lock in your makeup and prevent it from fading or moving throughout the day. It also gives your skin a more even and airbrushed finish. On the other hand, a primer helps to create a smooth canvas for your makeup to adhere to, and it can also help to reduce the appearance of pores and imperfections. By incorporating these two forgotten steps into your routine, you can achieve a more polished and long-lasting makeup look.

6. The importance of moisturizing before applying concealer

Moisturizing your skin before applying concealer is crucial for achieving a flawless finish. Dry skin can cause the concealer to crack and settle into fine lines, making it difficult to blend and creating an uneven appearance. By moisturizing your skin, you create a barrier between the concealer and your skin, allowing the concealer to sit smoothly on top without causing any discomfort or irritation. It also helps to set the foundation for a long-lasting, natural-looking finish.

7. Applying concealer in the correct order

The first step in applying concealer with a brush is to ensure that your skin is clean and moisturized. This will create a smooth canvas for the concealer to adhere to, and prevent it from creasing or fading throughout the day. Next, start by applying a light layer of concealer to the under eye area, blending it outwards towards the temples. Then, move on to the center of the face, blending the concealer upwards towards the hairline. Finally, apply a small amount to the inner corners of the nose and mouth, blending it outwards towards the edges. It’s important to remember that less is often more when it comes to concealer, so start with a small amount and build up gradually if needed. By following these simple steps, you can achieve a seamless, natural-looking coverage that lasts all day.

8. Setting concealer with powder

Setting concealer with powder is an important step in achieving a flawless complexion. It helps to lock in the concealer and create a smooth, even surface. However, many people make the mistake of using the wrong type of powder or not applying it correctly. Here are some tips to help you set concealer with powder like a pro:

1. Use a translucent powder: A translucent powder is ideal for setting concealer because it doesn’t affect the color of the concealer and creates a natural finish. Look for a powder that is lightweight and easy to blend.

2. Apply the powder with a brush: Using a brush allows you to apply the powder evenly and blend it into the skin. Start at the center of your face and work your way outwards, blending the powder onto the skin with a circular motion.

3. Set the powder with a dusting brush: After applying the powder, use a dusting brush to set it in place. This helps to prevent any creasing or settling throughout the day.

4. Don’t forget to blend: Make sure to blend the powder along the hairline and around the nose to avoid any harsh lines.

5. Finish with a finishing powder: For added longevity, finish with a finishing powder that matches your skin tone. This will help to set the entire makeup look and keep it in place all day long.

9. Common mistakes when using a brush

When it comes to applying concealer with a brush, there are several common mistakes that can lead to uneven coverage or a cakey appearance. Here are some of the most common mistakes to avoid:

1. Not wetting the brush before applying concealer: If the brush is not properly wet, it can cause the concealer to clump and settle into the pores of the skin, leading to a cakey appearance. To prevent this, wet the brush thoroughly with water or a wet wipe before applying concealer.

2. Using a brush that is too big or too small: Using a brush that is too large can cause the concealer to settle into the creases of the nose and eyes, while using a brush that is too small can make it difficult to cover larger areas such as the entire face. It’s important to choose a brush that is the right size for the area you are trying to cover.

3. Applying concealer in a heavy-handed manner: Using too much concealer can lead to a cakey appearance and make the skin look oily. Instead, use a light touch and blend the concealer evenly across the skin.

4. Not blending the concealer properly: Proper blending is key to achieving a natural-looking finish. Use a brush to blend the concealer upwards and outwards from the center of the face, working towards the hairline and jawline. This will create a seamless transition between the concealed area and the rest of the skin.

5. Forgetting to set the concealer with powder: Setting the concealer with powder will ensure that it stays in place and lasts throughout the day. Be sure to use a setting powder that is similar in color to your skin tone to avoid creating a gray cast.

10. Conclusion

In conclusion, applying concealer with a brush can be a daunting task, but with these tips and tricks, you can avoid common mistakes and achieve a flawless finish. Remember to choose the right shade, apply it correctly, blend well, use the right amount, set with powder, and moisturize beforehand. Don’t forget to prime and set with a setting spray if needed. With practice and patience, you can master the art of concealing and achieve a natural, radiant look. Happy concealing!